#X ray scanner pro generator
#X ray scanner pro full
#X ray scanner pro portable

The application performs complex data processing for enhancing images and automatic detection and measurement of defects inside the object.Try Xray Cloth Scanner is Simulator app. X-Shaper Laser Scan system consists of 2 surface scanners assemblies, each one using of a linear laser beam and a high definition camera.

#X ray scanner pro generator

The analyzed object is transported by conveyors through a laser beam scanning system, the image being taken over by dedicated video cameras, and after it is scanned using a system that includes an X-ray generator and detectors suitable for this purpose. X-Shaper Laser & X-Ray Scanner is designed for ballistic plates in-line control by scanning them in two stages: laser scan and x-ray scan.

Translation module is a translation table where the object is placed for Radioscopy or Laminography/Tomosynthesis Tomgraphy investigation.Rotation module is a rotating table where the object is placed for Radioscopy or Fan-beam Tomography investigation.X-Ray Source Support is a carriage that supports the X-ray Source and assures its alignment and precise positioning on the Magnification support.The magnification support destined for supporting, aligning and precise positioning the Detectors Panel, X-ray source and object placed on Rotating or Translating module.

#X ray scanner pro portable

X-Ray Source: portable and programmable: 160kV, 0.5 mA.Programmable gain in the ranges: ☐.1V ☐.2V ☐.5V ☑V ☒V ±5V ☑0V.

#X ray scanner pro full

Global offset compensation: yes, full 16 bits range.

Integration time per line: programmable between 0.5 to 100 mS.Scanning speed: programmable between 1 to 30 seconds.Detector size: 0.4mm(on request: 0.05mm, 0.2mm or 0.8mm.The Detectors Panel is a 2D dual-energy (linear array scanning based) X-ray detector with the main characteristics:.The DUALTOMO system contains the following main subassemblies: The DUALTOMO system contains dedicated components that could be easily manually configured in various accurate geometries for radioscopic and/or tomographic investigations as: portable and self-powered, in laboratory Radioscopy and 2D and 3D Fan-beam or Laminography/Tomosynthesis Tomography for investigated objects having maximum weight of 30Kg and size within 50cm*50cm*55cm. The application performs complex data processing for enhancing images and automatic detection and measurement of defects inside the object. The X-Ray Scan system uses a system of 2 X-Ray high definition detectors, each one providing data regarding different zones of the scanned object. The data analyze software provides accurate measurements of the product parameters: local thickness, length, width, volume and density. The assemblies are posted symmetrically, one on below the scanned object and one under the scanned object. The system consists of 2 surface scanners assemblies, each one using of a linear laser beam and a high definition camera. The equipment produced by Accent Pro 2000 is designed for in-line control of metal, ceramic or composite parts, by scanning them in two stages: laser scan and x-ray scan.ĭata obtained in this way is processed and analyzed using software applications, obtaining information about size, density and internal structure, allowing automanic identification of possible manufacturing defects.